Velo3D Q3 2026 earnings

VELO · 2026-11-10 16:05 AMC ET · 8-K on SEC

Revenue up 50% YoY to $20.5M; gross margin improved to 26.5% from 3.2%; backlog $40.1M.

Headline numbers

MetricActualYoYQoQ8-K location
Revenue$20.5M+50%—Ex. 99.1, Summary
EPS (GAAP)-$0.52+20% (improvement)—Ex. 99.1, Summary
EPS (adjusted)-$0.34+37% (improvement)—Ex. 99.1, Summary
Net income-$16.7M+49% (improvement)—Ex. 99.1, Summary
Adj. EBITDA-$9.8M+34% (improvement)—Ex. 99.1, Summary
Adj. EBITDA margin-47.8%+40.6 pp—Ex. 99.1, Summary

Revenue breakdown

SegmentActualYoYShare of revenueNote
3D Printer and parts$18.8M+57.0%91.7%Driven by higher ASPs, favorable mix, and increased RPS volume
Support services$1.4M+4.4%6.9%—
Other$0.2M-30.1%1.0%—

Margins and costs

  • Gross margin 26.5% (prior 3.2%, change +23.3 pp)
  • Operating expenses $22.7M (+117.6% YoY)
  • One-offs in the quarter Stock-based compensation: $5.9M; Loss on warrant cancellation: $0.0M; Gain on fair value of warrants: -$0.1M; Gain on fair value of contingent earnout: $0.0M; Reserve for excess and obsolete inventory: $1.9M
  • Effective tax rate -0.1% (prior -0.1%, year-to-date -0.1%)
  • Non-GAAP bridge Adds back stock-based compensation, loss on warrant cancellation, and fair value adjustments for warrants and earnout liability.

KPIs

MetricActualPrior quarterPrior yearChange
New bookings$28.9M———
Backlog$40.1M———
Cash and cash equivalents$75.7M—$39.0M+94.2%
Total debt$7.4M—$31.0M-76.1%

Guidance

MetricGuidePrior guideChange
Revenue$65M to $75M$65M to $75MReaffirmed
Gross marginSequential improvement in Q4Greater than 30% in the second half of 2026Revised down
Non-GAAP adjusted operating expenses$45M to $55M$45M to $55MReaffirmed
Capital expenditures$10M to $20M$40M to $50MReduced
Positive net cash from operations2028—Provided
Positive EBITDA2028Second half of 2026Delayed

What drove it

  • Revenue story 3D Printer and parts revenue increased 57.0% YoY to $18.8M; total revenue increased 50% YoY to $20.5M.
  • EPS story GAAP net loss per share improved to -$0.52 from -$0.65; Non-GAAP net loss per share improved to -$0.34 from -$0.54.
  • One-off check Stock-based compensation $5.9M; Loss on warrant cancellation $0.0M; Gain on fair value of warrants -$0.1M; Gain on fair value of contingent earnout $0.0M; Reserve for excess and obsolete inventory $1.9M.

The good

  • Revenue up 50% YoY to $20.5M
  • New bookings of $28.9M
  • Gross margin improved to 26.5% from 3.2%
  • Backlog of $40.1M
  • Cash and cash equivalents increased to $75.7M
  • Debt reduced by 76% to $7.4M

The bad

  • GAAP net loss of $16.7M
  • Non-GAAP net loss of $10.8M
  • Adjusted EBITDA loss of $9.8M
  • Operating expenses increased 117.6% YoY to $22.7M

The ugly

  • none

Open questions

  • Sequential Q4 gross margin improvement guidance
  • Timeline for Forge 1 to become fully operational and at scale
  • Quantitative reconciliation for 2026 non-GAAP adjusted operating expenses and 2028 EBITDA guidance
Full release

Velo3D (VELO) earnings release, November 10, 2026

Velo3D, Inc. (VELO) · Form 8-K, Item 2.02 · Filed · SEC filing

Velo3D Announces Third Quarter 2026 Financial Results

• Revenue of $20.5 million, up 50% year-over-year

• New bookings of $28.9 million

• Gross margin of 26.5%

• Cash and cash equivalents of $75.7 million as of September 30, 2026

• Reaffirms 2026 Revenue Guidance; Revises 2026 Gross Margin Guidance; Reduces 2026 Capital Expenditures Guidance; Now Expects Positive Net Cash from Operations in 2028

FREMONT, Calif., Nov. 10, 2026

- Velo3D, Inc. (Nasdaq: VELO) (“Velo3D” or the “Company”), a leading metal additive manufacturing (“AM”) technology company focused on aerospace and defense supply chains, today announced financial results for its third quarter ended September 30, 2026.

Arun Jeldi, Chief Executive Officer of Velo3D, said, “We delivered solid third quarter results, with revenue increasing approximately 50% year-over-year to $20.5 million and new bookings reaching $28.9 million, exceeding revenue for the quarter. These results reflect continued customer demand for our metal additive manufacturing technology and the progress we are making in executing our growth strategy. Operating expenses increased as we continued investing in the people, technology and operational capabilities needed to bring our Livermore Production Campus, Forge 1, online and prepare for expanded production. We believe these investments are an important step in positioning Velo3D to scale operations and meet customer demand.

Looking ahead, Forge 1 is central to Velo3D’s next phase of growth and is expected to significantly expand our production capacity as it becomes fully operational, enabling us to pursue larger production programs and capture opportunities across aerospace, defense, space and energy. While a substantial portion of our planned capital expenditures is shifting into 2027, we believe these investments in infrastructure, talent and manufacturing capabilities are essential to scaling our operations, strengthening execution and building the foundation for sustainable, profitable growth.”

Recent Business Developments

• Opened the new Livermore Production Campus, Forge 1 in July 2026.

The campus has commenced operations in phases and is not yet operating at scale. It is expected to significantly expand the Company’s manufacturing production capacity as it is brought to full operation, and to support demand from aerospace and defense customers for the Company's metal additive manufacturing solutions. The Company expects Forge 1 to serve as its primary production and manufacturing center.

• Joined the Government-Industry Data Exchange Program (GIDEP) to further strengthen quality, reliability and supply-chain risk management for defense manufacturing activities, providing access to critical technical and quality information that supports risk mitigation and the production of mission-critical components for U.S. defense programs.

• Expanded partnership with Mears Machine Corporation as Mears ordered its sixth Sapphire® XC system, dedicated to copper-nickel (CuNi) additive manufacturing. The system expands Velo3D’s production platform into a material critical to shipbuilding and offshore applications, enabling U.S.-based production of corrosion-resistant components.

• Expanded technology and operational capabilities with the appointments of Vic Fryzel as Executive Vice President, Technology, and Robert Purnell as Senior Director, Operations, to advance platform reliability, manufacturing readiness, quality and delivery performance at Forge 1, supporting scalable production and Velo3D’s Rapid Production Solutions offering.

1.

Information about Velo3D’s use of non-GAAP information, including a reconciliation to accounting principles generally accepted in the United States of America ("GAAP"), is provided at the end of this release under “Non-GAAP Financial Information”. The non-GAAP financial measures presented in this release should not be considered as the sole measure of the Company’s performance and should not be considered in isolation from, or as a substitute for, comparable financial measures calculated in accordance with GAAP.

2.

Non-GAAP net loss and non-GAAP net loss per basic and diluted share exclude stock-based compensation expense, loss on warrant cancellation, and fair value adjustments for the Company’s warrants and earnout liability.

Summary of Third Quarter 2026 Results

Total revenue was $20.5 million. 3D Printer and parts revenue was $18.8 million and increased 57.0% compared to $12.0 million in the third quarter of 2025. This increase was driven by an increase in the number of 3D Printer systems sold, higher average selling prices and a more favorable product mix, as well as an increase in RPS revenue driven by higher production volume during the three months ended September 30, 2026, compared to the three months ended September 30, 2025.

Gross margin for the third quarter was 26.5% compared to 3.2% in the third quarter of 2025. Gross profit and gross margin improved primarily due to higher average selling prices, a more favorable product mix, improved manufacturing efficiencies and increased production volumes that improved the absorption of fixed manufacturing costs, a net release of excess and obsolete inventory reserves in the current period, reflecting the utilization in production of previously reserved inventory, partially offset by increases in reserves for other inventory. Results also benefited from the prospective refinement in the allocation of certain labor and overhead costs between cost of revenue and operating expenses, implemented in the second quarter of 2026 to better align such costs with current operational activities.... (truncated)1 million in the third quarter of 2025.

GAAP net loss for the third quarter was ($16.7) million, or ($0.52) per basic and diluted share, compared to ($11.2) million, or ($0.65) per basic and diluted share in the third quarter of 2025.

Non-GAAP net loss for the third quarter was ($10.8) million compared to ($9.3) million in the third quarter of 2025. Adjusted EBITDA for the third quarter was ($9.8) million compared to ($7.3) million in the third quarter of 2025. For more information regarding the Company’s non-GAAP financial measures, including reconciliations to the most directly comparable GAAP measures, see “Non-GAAP Financial Information” below.

The Company had $28.9 million in new bookings during the third quarter and backlog of $40.1 million as of September 30, 2026.

As of September 30, 2026, the Company had $75.7 million of cash and cash equivalents, compared to $39.0 million as of December 31, 2025. The increase was driven primarily by net cash provided by financing activities of approximately $98.6 million during the first nine months of 2026, partially offset by approximately $52.2 million of cash used in operating activities and approximately $6.4 million of cash used in investing activities. In April 2026, the Company completed a firm commitment underwritten registered direct offering of 3,571,428 shares of its common stock, resulting in gross proceeds of approximately $50 million (approximately $46.6 million net of issuance costs). The Company also raised gross proceeds of approximately $59.4 million during the second quarter under its at-the-market offering program (approximately $57.4 million net of issuance costs). As a result of the conversion of the Company’s convertible secured notes into common stock in March 2026, the repayment in full of its Secured Notes and scheduled repayments under its equipment loan, the Company's total outstanding debt decreased by approximately 76% to $7.4 million as of September 30, 2026, from $31.0 million as of December 31, 2025.

In connection with the preparation of its financial statements for the third quarter of 2026, management evaluated the Company's ability to continue as a going concern and concluded that there is no longer substantial doubt about the Company's ability to continue as a going concern for the twelve months following the issuance of its third quarter 2026 financial statements. Management's assessment does not assume that additional financing is required to fund operations or satisfy obligations during that period. Additional information will be included in the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2026.

Guidance

Management is reaffirming its full-year 2026 revenue and non-GAAP adjusted operating expense guidance, is revising its gross margin guidance and reducing its capital expenditure outlook, and is providing an expected timeline for achieving positive net cash from operations and an updated expected timeline for achieving positive EBITDA as follows:

• Revenue in the range of $65 million to $75 million.

• Sequential improvement in gross margin in the fourth quarter of 2026. The Company is no longer providing its prior expectation of greater than 30% gross margin in the second half of 2026.

• Non-GAAP adjusted operating expenses in the range of $45 million to $55 million.

• Capital expenditures in the range of $10 million to $20 million, reduced from the Company's prior expectation of $40 million to $50 million, primarily reflecting the shift of a substantial portion of planned capital expenditures into 2027.

• Positive net cash from operations and positive EBITDA in 2028, compared with the Company’s prior expectation of positive EBITDA in the second half of 2026.

Conference Call

The Company will host a conference call for investors to discuss its third quarter 2026 financial results at 2:00 p.m. Pacific time / 5:00 p.m. Eastern time on November 10, 2026. The call will be webcast and can be accessed from the Events page of the Investor Relations section of Velo3D’s website at ir.velo3d.com.

About Velo3D:

Velo3D is a metal 3D printing technology company that enables customers to build mission-critical metal parts. The fully integrated solution includes the Flow print preparation software, the Sapphire® family of printers, and the Assure quality control system—all of which are powered by Velo3D's Intelligent Fusion® manufacturing process. Learn more at velo3d.com.

Velo, Velo3D, Sapphire and Intelligent Fusion are registered trademarks of Velo3D, Inc. Flow, Flow Developer, Without Compromise and Assure are trademarks of Velo3D, Inc.

###

Investor Relations:

Hayden IR

James Carbonara investors@velo3d.com

Media Contact:

Velo3D press@velo3d.com

During the third quarter of 2026, the Company revised its previously issued unaudited condensed consolidated financial statements for the three months ended March 31, 2026 and the three and six months ended June 30, 2026 to correct errors related to its excess and obsolete inventory reserve. The revisions reduced the previously reported net loss for the six months ended June 30, 2026 by approximately $1.6 million. Nine-month 2026 amounts in this release reflect the revised amounts. See Note 2 to the condensed consolidated financial statements in the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2026.

Amounts herein pertaining to the Company’s third quarter ended September 30, 2026 results represent a preliminary estimate as of the date of this earnings release and may be revised upon filing of the Company’s Quarterly Report on Form 10-Q with the U.S. Securities and Exchange Commission (the “SEC”). Additional information on the Company’s results of operations for the three and nine months ended September 30, 2026 will be provided upon the filing of its Quarterly Report on Form 10-Q with the SEC.

Financial statements

Income Statement

3rd Quarter 2026 ($ in Millions, except percentages and per-share data)

3rd Quarter 20263rd Quarter 2025
GAAP revenue20.513.6
GAAP gross margin26.5%3.2%
GAAP net loss1-16.7-11.2
GAAP net loss per share – basic and diluted-0.52-0.65
Non-GAAP net loss1,2-10.8-9.3
Non-GAAP net loss per share – basic and diluted1,2-0.34-0.54

Income Statement

Three months ended — (Unaudited) (in thousands)

Three months ended – September 30, 2026Three months ended – September 30, 2025Nine months ended – September 30, 2026Nine months ended – September 30, 2025
Revenue20,45013,64054,93036,532
Gross profit (loss)5,41843314,369-458
Net Loss-16,692-11,188-33,608-49,465
Stock-based compensation5,9281,90510,3117,335
(Gain) loss on fair value of warrants-68-271,044
Gain on fair value of contingent earnout-1-1
Loss on warrant cancellation11,357
Non-GAAP Net Loss-10,833-9,283-23,325-29,729

Income Statement

Three months ended — (Unaudited) (in thousands)

Three months ended – September 30, 2026Three months ended – September 30, 2025Nine months ended – September 30, 2026Nine months ended – September 30, 2025
Revenue20,45013,64054,93036,532
Net Loss-16,692-11,188-33,608-49,465
Interest expense1601,1981,0683,840
Provision for (benefit from) income taxes-21-14-483
Depreciation and amortization8848132,3582,630
EBITDA-15,669-9,191-30,186-42,912
Stock-based compensation5,9281,90510,3117,335
(Gain) loss on fair value of warrants-68-271,044
Gain on fair value of contingent earnout-1-1
Loss on warrant cancellation11,357
Non-GAAP Adjusted EBITDA-9,810-7,286-19,903-23,176

Income Statement

Three months ended — (Unaudited) (in thousands)

Three months ended – September 30, 2026Three months ended – September 30, 2025Nine months ended – September 30, 2026Nine months ended – September 30, 2025
Revenue20,45013,64054,93036,532
Operating expenses
Research and development5,3872,72212,9487,369
Selling and marketing3,1781,7977,7494,351
General and administrative14,1415,90727,37720,934
Total operating expenses22,70610,42648,07432,654
Stock-based compensation recorded in operating expenses5,6961,3109,3325,933
Non-GAAP Adjusted operating expenses17,0109,11638,74226,721

Income Statement

The three months ended September 30, — (In thousands, except share and per share data)

The three months ended September 30, – 2026The three months ended September 30, – 2025The nine months ended September 30, – 2026The nine months ended September 30, – 2025
Revenue
3D Printer and parts18,83211,99349,82131,598
Recurring payment70
Support services1,4111,3514,1744,500
Other207296935364
Total Revenue20,45013,64054,93036,532
Cost of revenue
3D Printer and parts13,95011,85537,80233,389
Recurring payment12
Support services1,0821,3522,7593,589
Total cost of revenue15,03213,20740,56136,990
Gross profit (loss)5,41843314,369-458
Operating expenses
Research and development5,3872,72212,9487,369
Selling and marketing3,1781,7977,7494,351
General and administrative14,1415,90727,37720,934
Total operating expenses22,70610,42648,07432,654
Loss from operations-17,288-9,993-33,705-33,112
Interest expense-160-1,198-1,068-3,840
Gain (loss) on fair value of warrants6827-1,044
Gain on fair value of contingent earnout liabilities11
Loss on warrant cancellation-11,357
Other income (expense), net666-111,133-29
Loss before income taxes-16,713-11,202-33,612-49,382
Provision for (benefit from) income taxes-21-14-483
Net loss-16,692-11,188-33,608-49,465
Net loss per share:
Basic and Diluted-0.52-0.65-1.16-3.33
Shares used in computing net loss per share:
Basic and Diluted32,199,62417,124,36128,915,96514,868,372

Balance Sheet

September 30, — (In thousands, except share and per share data)

September 30, – 2026December 31, – 2025
Current assets:
Cash and cash equivalents75,73239,013
Accounts receivable, net8,6586,263
Inventories, net30,76527,083
Contract assets16,3032,039
Prepaid expenses and other current assets12,9635,722
Total current assets144,42180,120
Property and equipment, net23,21613,094
Equipment subject to operating lease, net4941,629
Other assets84,17410,505
Total assets252,305105,348
Current liabilities:
Accounts payable6,44010,301
Accrued expenses and other current liabilities7,7027,915
Debt – current portion3,2616,305
Contract liabilities10,7889,281
Total current liabilities28,19133,802
Long-term debt – less current portion4,13524,710

Cash Flow

The nine months ended September 30, — (In thousands)

The nine months ended September 30, – 2026The nine months ended September 30, – 2025
Cash flows from operating activities
Net loss-33,608-49,465
Adjustments to reconcile net loss to net cash used in operating activities
Depreciation and amortization2,3582,630
Amortization of debt discount and deferred financing costs17148
Stock-based compensation10,3117,335
(Gain) loss on fair value of warrants-271,044
Gain on fair value of contingent earnout liabilities-1
Loss on warrant cancellation11,357
Reserve for excess and obsolete inventory1,948
Provision for credit losses5737
Non-cash lease expense156105
Loss on sale/disposal of fixed assets24
Changes in operating assets and liabilities
Accounts receivable-2,452-2,986
Inventories-3,17711,333
Contract assets-14,264-2,938
Prepaid expenses and other current assets-7,241507
Other assets871-5,890
Accounts payable-10,052-1,762
Accrued expenses and other liabilities-1,54311,876
Contract liabilities1,507-2,057
Other noncurrent liabilities2,947-888
Net cash used in operating activities-52,193-19,590
Cash flows from investing activities
Purchase of property and equipment-6,375-2,112
Net cash used in investing activities-6,375-2,112
Cash flows from financing activities
Proceeds from convertible secured notes15,000
Gross proceeds from April 2026 Offering50,000
Payment for issuance costs related to April 2026 Offering-3,408
Gross proceeds from ATM Offering59,428
Payment for issuance costs related to ATM Offering-2,070
Gross proceeds from August 2025 Offering20,125
Payment for issuance cost related to August 2025 Offering-2,303
Repayment of 2025 equipment loan-2,282
Repayment of secured notes-3,039-499
Net cash provided by financing activities98,62932,323
Effect of exchange rate changes on cash and cash equivalents64
Net change in cash and cash equivalents and restricted cash40,06710,625
Cash and cash equivalents and restricted cash at beginning of period39,6361,840
Cash and cash equivalents and restricted cash at end of period79,70312,465

Forward-Looking Statements:

This press release includes “forward-looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. The Company’s actual results may differ from its expectations, estimates and projections and consequently, you should not rely on these forward-looking statements as predictions of future events. Words such as “expect”, “estimate”, “project”, “budget”, “forecast”, “anticipate”, “intend”, “plan”, “may”, “will”, “could”, “should”, “believes”, “predicts”, “potential”, “continue”, and similar expressions are intended to identify such forward-looking statements. These forward-looking statements include, without limitation, the Company's guidance for fiscal year 2026 (including the Company’s estimates for revenue, gross margin, non-GAAP adjusted operating expenses and capital expenditures), the Company's expectations regarding the timing and amount of its capital expenditures, including the shift of planned capital expenditures into 2027 and its ability to finance them, the Company’s expectations regarding its ability to achieve positive EBITDA and positive net cash provided by operating activities in 2028, management's conclusion that conditions and events no longer raise substantial doubt about the Company's ability to continue as a going concern for the twelve months following issuance of its third quarter 2026 financial statements, the Company's expectations regarding the remediation of the remaining material weaknesses in its internal control over financial reporting, the Company’s expectations about future demand, growth, profitability, long-term value, capacity requirements and operational efficiencies, scaled production, pipeline of opportunities, customer priorities, gross margins, the Company’s expectations regarding its liquidity and capital requirements, including any plans to raise additional capital to support its expansion and the potential sources and uses of that capital, and the Company’s beliefs regarding its ability to execute on strategic initiatives, scale operations, achieve sustainable, profitable growth and capitalize on demand, the Company’s expectations regarding the timing of the Livermore Production Campus (Forge 1) becoming fully operational and its expected manufacturing capacity, role as the Company’s primary production and manufacturing center, delivery timelines, and cost benefits, the expected benefits of the Company's participation in the Government-Industry Data Exchange Program and its recent leadership appointments, the Company's expectations regarding the development, introduction, timing and anticipated benefits of new products, including expected improvements in productivity, output per printer and cost, the Company’s expectations regarding its potential cost savings, the Company’s expectations about its market strategy and financial and operational position, the Company's expectations that the RPS parts production business will contribute an increasing share of revenue, and the Company’s other expectations, beliefs, intentions or strategies for the future. These forward-looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results. You should carefully consider the risks and uncertainties described in the “Risk Factors” section of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2025 (the “FY 2025 10-K”) and its Quarterly Reports on Form 10-Q ("Quarterly Reports"), including its Quarterly Report on Form 10-Q for the quarter ended September 30, 2026 to be filed with the SEC, and the other documents filed by the Company from time to time with the SEC. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Most of these factors are outside the Company’s control and are difficult to predict. Factors that may cause such differences include, but are not limited to: (1) the inability of the Company to execute its business plan, which may be affected by, among other things, competition, the Company’s liquidity position, the ability of the Company to grow and manage growth profitably, maintain relationships with customers and suppliers and retain its key employees; (2) whether the Company’s existing cash and cash equivalents will be sufficient to fund its operating expenses and capital expenditure requirements, and the Company’s ability to continue as a going concern; (3) the Company’s ability to service and comply with its indebtedness; (4) the Company’s ability to raise additional capital on acceptable terms, or at all; (5) the Company's ability to equip, commission, qualify and ramp Forge 1 on the expected timeline and budget, and the risk of operating Forge 1 below capacity given its fixed lease and operating costs; (6) the impact of tariffs, supplier pricing and credit terms on the Company's cost of revenue and gross margin, and the risk that gross margin will vary from period to period, including as a result of inventory-related adjustments; (7) the Company's dependence on a limited number of customers for a significant portion of its revenue; (8) the possibility that the Company may be adversely affected by other economic, business, and/or competitive factors; (9) the risk that future sales of common stock, including sales under the Company's at-the-market offering program, will dilute existing stockholders and may adversely affect the market price of the Company's common stock; (10) changes in the applicable laws and regulations; (11) risks related to the Company’s exposure to government and defense contracts, including potential delays or reductions in government funding, government shutdowns, changes in defense procurement priorities or spending levels, and the timing and uncertainty of government contract awards and modifications; (12) the risk that the

Company's backlog and bookings may not convert into revenue on the timelines the Company expects, or at all; (13) the Company's ability to remediate the remaining material weaknesses in its internal control over financial reporting; (14) the risk that the Company may not achieve its financial guidance for fiscal year 2026, or its expectations regarding positive EBITDA and positive net cash provided by operating activities in 2028, and that actual results may differ materially from, or that the Company may revise, such guidance or expectations; and (15) other risks and uncertainties described in the FY 2025 10-K and the Quarterly Reports, including those under “Risk Factors” therein, and in the Company’s other filings with the SEC. The Company cautions that the foregoing list of factors is not exclusive and cautions readers not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date made. The Company does not undertake or accept any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based, except as required by applicable law.

Non-GAAP Financial Information

The information in the table below sets forth the non-GAAP financial measures that the Company uses in this release. Because of the inherent limitations associated with these non-GAAP financial measures, “Non-GAAP Net Loss”, “Non-GAAP net loss per basic and diluted share”, “EBITDA”, “Adjusted EBITDA” and “Non-GAAP Adjusted Operating Expenses”, should not be considered in isolation or as a substitute for performance measures calculated in accordance with GAAP. In addition, these non-GAAP financial measures may differ from, and should not be compared to, similarly named measures used by other companies. The Company compensates for these limitations by relying primarily on its GAAP results and using Non-GAAP Net Loss, Non-GAAP net loss per basic and diluted share, EBITDA, Adjusted EBITDA, and Non-GAAP Adjusted Operating Expenses on a supplemental basis. You should review the reconciliation of the non-GAAP financial measures below and not rely on any single financial measure to evaluate the Company's business.

Management uses “Non-GAAP Net Loss”, “Non-GAAP net loss per basic and diluted share”, “EBITDA”, “Adjusted EBITDA” and “Non-GAAP Adjusted Operating Expenses” to evaluate operating performance, prepare budgets and forecasts, and evaluate performance for compensation purposes. Management believes these measures are useful to investors because they allow for comparison to the Company’s performance in prior periods without the effect of items that, by their nature, tend to obscure the Company’s core operating results due to potential variability across periods based on the timing, frequency and magnitude of such items. As a result, management believes that these measures enhance the ability of investors to analyze trends in the Company’s business and evaluate the Company’s performance relative to peer companies.

Reconciliations of the differences between these non-GAAP financial measures and their most directly comparable financial measures calculated in accordance with GAAP are set forth below.

The Company’s non-GAAP adjusted operating expenses are calculated by excluding stock-based compensation recorded in operating expenses. The Company’s EBITDA is calculated as net loss excluding interest expense, provision for (benefit from) income taxes, and depreciation and amortization. Adjusted EBITDA further excludes stock-based compensation, loss on warrant cancellation, fair value adjustments for the Company's warrants and earnout liability. With respect to the Company’s guidance regarding non-GAAP adjusted operating expenses for 2026 and EBITDA for 2028, the Company cannot provide, without unreasonable effort, a quantitative reconciliation to the most directly comparable GAAP measures, operating expenses and net loss, respectively, because it cannot predict with reasonable certainty certain items needed to calculate such measures, including stock-based compensation expense, which depends on future grants and the price of the Company’s common stock, and interest income and expense, income taxes and depreciation and amortization associated with the timing of future capital expenditures. These items could have a significant impact on the Company’s GAAP results.

Velo3D, Inc.

Non-GAAP Net Loss Reconciliation

(Unaudited)

Velo3D, Inc.

Non-GAAP Adjusted EBITDA Reconciliation

(Unaudited)

Velo3D, Inc.

Non-GAAP Adjusted Operating Expenses Reconciliation

(Unaudited)

From SEC EDGAR. Analysis by Pear Digitals from the filing alone. Not investment advice. · Velo3D earnings · Latest earnings · Markdown

Screener

Plans

Premium and Pro coming soon.

Log in

New here?

Join the waitlist

Pear FMV opens to everyone soon. We'll email you when it does.